About this site

. profile
1883
National Maritime Museum

30 ft Cutter for Neptune (1874), and Minotaur (1863). Scale: 1:24. Plan showing the sail and rig elevation of a 30 ft Cutter for Neptune (1874), a Neptune class, three-masted turret Ironclad, and for Minotaur (1863), a 36-gun broadside armoured Ironclad
Dated: 12 March 1883
National Maritime Museum

27 ft Cutter. Scale: 1:48. Plan showing the sail plan for a 27 ft Cutter, with a standing lug, as proposed with reference to the Controller's order of 28 February 1883. Signed J. Palmer [Additional Staff Captain for Service at Keyham, February 1882
Dated: April 1883
National Maritime Museum

Dreadnought (1875). Scale 1:48. Engineers' General Arrangement Plan for the turret battleship HMS Dreadnought (1875), as fitting prior to being commissioned in 1884. The plan shows lead of steam (and hydraulic?) pipes and auxiliary machinery, and h
3 April 1883
National Maritime Museum

Dreadnought (1875). Scale 1:48. Engineers' sketch general arrangement of the main deck for the turret battleship HMS Dreadnought (1875), as fitting prior to being commissioned in 1884. Shows original torpedo tubes and turret roller path.
3 April 1883
National Maritime Museum

Dreadnought (1875). Scale 1:48. Outline sketch General Arrangement showing the upper deck, tops of turrets, and Flying Deck (and coaling scuttles) for the turret battleship HMS Dreadnought (1875), as fitting prior to being commissioned in 1884. Rubber s
3 April 1883
National Maritime Museum

Dreadnought (1875). Scale 1:48. Engineers' General Arrangement of Machinery and Pipework for the turret battleship HMS Dreadnought (1875), as fitting in 1883 prior to being commissioned in 1884. Not labelled as to function but fully dimensioned (e.g.
3 April 1883
National Maritime Museum

Dreadnought (1875). Scale 1:48: Plan shpwing the arrangement of engines and boilers as fitted by Messrs Humphry's Tennant & Co and placed on board the turret battleship HMS Dreadnought (1875), as fitting prior to being commissioned in 1884. The p
3 April 1883
National Maritime Museum

27 ft Cutter. Scale: 1:48. Plan showing the rig and sail plan as shown on the official lithographs, and the proposed rig with a standing lug for 27 ft Cutters. Signed J. Angear [Chief Constructor, Devonport Dockyard, unknown dates].
Dated: 7 April 1883
National Maritime Museum