About this site

. Scale: circa 1:4. A model of a boring machine made in metal with a wooden base and brass and steel working components. There is a piece of wood from which the block is to be made which has been cut to the proper size by a sawing machine. Two drills work
About 1801
National Maritime Museum

. Scale: circa 1:4. A model of a coaking machine made entirely in metal. The machine is supported on three architectural brass columns and three smaller columns above. The frame is made of brass and the working components are made in brass and steel. The
About 1801
National Maritime Museum

. Scale: circa 1:4. A model of a corner sawing machine made in metal. The machine is supported on four architectural brass columns. The frame is made of brass and the working components are made in brass and steel. The model has a rectangular block of woo
About 1801
National Maritime Museum

. Scale: circa 1:4. A model of a lathe made in metal. The machine is mounted on a platform supported by four architectural brass columns inclined at an angle of about 80 degrees and the working components are made in brass and steel. Two sheaves are depic
About 1801
National Maritime Museum

. Scale: circa 1:4. A model of a mortising machine made entirely in metal with component parts made of brass and steel. At one end of the model is a large six spoked wheel painted black, and a large handle for operating the model. Two mortises are cut by
About 1801
National Maritime Museum

. Scale: circa 1:4. A model of a rounding and drilling machine made in metal. The machine is mounted on a platform supported by four architectural brass columns inclined at an angle of about 80 degrees and the working components are made in brass and stee
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of a boring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of a boring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of a corner sawing machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of the scoring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of the scoring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of the scoring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of the scoring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of the scoring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Block for the model of the scoring machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Finished sheave for the model of the rounding and drilling machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Sheave for the model of a coaking machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Sheave for the model of a lathe made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Sheave for the model of a lathe made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: circa 1:4. Sheave for the model of the rounding and drilling machine made in metal with a wooden base and brass and steel working components.
About 1801
National Maritime Museum

. Scale: Unknown. A model of a shaping machine made entirely in metal with wooden components and a brass frame. The uprights depict architectural columns and the whole structure is rectangular in plan view. Two crossbars support an axle on which is placed
circa 1802
National Maritime Museum

. Scale:circa 1:4. A model of a scoring machine made in metal with working components made in brass and steel. The machine is supported on four architectural brass columns within a brass frame surmounted by two acorn shaped finials. Two blocks are shown b
About 1801
National Maritime Museum